Triumph Speed Triple R User Manual

General Information
58
High Beam Button
When the high beam button is pressed
the high beam will be switched on. Each
press of the button will swap between
dip and high beam.
Note:
• If daytime running lights are fitted
to the motorcycle, the high beam
button has additional functionality.
If the DRL switch is in the daytime
running lights position, then press and
hold the high beam button to turn the
high beam on. It will remain on as long as
the button is held in and will turn off as
soon as the button is released.
Note:
• A lighting on/off switch is not fitted
to this model. The position light, rear
light and license plate light all
function automatically when the
ignition is turned to the ON position.
• The headlight will function when the
ignition switch is turned to the ON
position.
• The headlight will go off while
pressing the starter button until the
engine starts.
Fuel Requirement/Refuelling
Fuel Grade
Your Triumph engine is designed to use
unleaded fuel and will give optimum
performance if the correct grade of fuel
is used. Always use unleaded fuel with
an octane rating of 95 RON.
Caution
In all countries except Australia and
New Zealand the exhaust system is
fitted with a catalytic converter to
help reduce exhaust emission levels.
The catalytic converter can be
permanently damaged if the
motorcycle is allowed to run out of
fuel or if the fuel level is allowed to get
very low. Always make sure you have
adequate fuel for your journey.
Caution
The use of leaded fuel is illegal in most
countries, states or territories. Use of
leaded fuel will damage the catalytic
converter (if fitted).
P
b

Triumph Speed Triple R Specifications

General

Brand	Triumph
Model	Speed Triple R
Category	Motorcycle
Language	English