General Information
43
Setting the RIDER Mode Options
Note:
• During setup, ABS and TTC can be
activated or de-activated in the
RIDER mode.
• If the RIDER mode is currently
selected, changes to the MAP, ABS
and TTC systems will become
immediately active.
•If the ROAD or TRACK modes are
selected the RIDER settings will not
become active until the RIDER mode
is selected (see page 38).
To set the RIDER mode options; with the
motorcycle stationary and in neutral,
turn the ignition to the ON position.
• Press and release the MODE button
on the left handlebar switch housing
until RIDER mode is selected.
• Press and hold the MODE button until
MAP is shown in the display screen.
or alternatively:
• Press and release button ’A’ until
SEtUP is shown in the display
screen. Press button ’B’ to confirm.
• Press and release button ’A’ until
RIdER is displayed in the lower
instrument display, then press
button ’B’ to confirm.
RIdER Displayed
MAP Options
Press button ’A’ and choose one of the
available MAP options:
•Rain
•Road
•Sport.
Rain Option Shown
Press button ’B’ to confirm the selection.
ABS is now shown in the display screen.
To Next Page
Loading...
Need help?
General
