Triumph Speed Triple R User Manual

Maintenance and Adjustment
132
License Plate Light
Bulb Replacement
Release the three fixings and remove
the front panel from the fuel tank.
1. Front panel
2. Fixings
Disconnect the battery, negative (black)
lead first.
1. Fixing
2. License plate bracket
Release the fixing and detach the light
from the license plate bracket. It is not
necessary to disconnect the license
plate electrical connectors.
Carefully remove the bulb holder from
the back of the license plate light unit.
Remove the bulb.
1. License plate light
2. Bulb holder
Installation is the reverse of the removal
procedure, noting the following:
Tighten the lamp fixing to 2Nm.
Reconnect the battery, positive (red)
lead first.
Refit the front panel and tighten the
side fixings to 2Nm.
cgfo
2
1
2
2
cjgn
1
2
Caution
To avoid cable damage, do not pull the
bulb holder using the cables. Pull only
on the bulb holder.
1
cgfk
2

Triumph Speed Triple R Specifications

General

Brand	Triumph
Model	Speed Triple R
Category	Motorcycle
Language	English