Maintenance and Adjustment
120
Tyre Replacement
All Triumph motorcycles are carefully
and extensively tested in a range of
riding conditions to ensure that the
most effective tyre combinations are
approved for use on this model. It is
essential that approved tyres, fitted in
approved combinations, are used when
purchasing replacement tyres.
The use of non-approved tyres, or
approved tyres in non-approved
combinations, may lead to motorcycle
instability and an accident. On models
fitted with ABS, different wheel speeds,
caused by non-approved tyres can
affect the function of the ABS computer.
See the Specification section for details
of approved tyre combinations. Always
have tyres fitted and balanced by your
authorised Triumph dealer who has the
necessary training and skills to ensure
safe, effective fitment.
Tyre Pressure Monitoring System
(Only on models fitted with TPMS)
An adhesive label is fitted to the wheel
rim to indicate the position of the tyre
pressure sensor. Care must be taken
when replacing the tyres to prevent
any damage to the tyre pressure
sensors. Always have your tyres fitted
by your authorised Triumph dealer
and inform them that tyre pressure
sensors are fitted to the wheels.
Use of non-recommended tyres can
affect wheel speed and cause the
Triumph traction control function not
to operate, potentially leading to loss
of control and an accident in
conditions where the Triumph traction
control would normally function.
On models fitted with ABS, the ABS
computer operates by comparing the
relative speed of the front and rear
wheels. Use of non-recommended
tyres can affect wheel speed and
cause the ABS function not to
operate, potentially leading to loss of
control and an accident in conditions
where the ABS would normally
function.
To Next Page
Loading...
Need help?
General
