Maintenance and Adjustment
113
To change the spring pre-load, rotate
the adjuster clockwise to increase
pre-load, or anti-clockwise to decrease
pre-load. Always count the number of
clockwise turns from the fully anti-
clockwise position and set both forks to
the same settings.
Note:
• The Speed Triple S is delivered from
the factory with the spring pre-load
set at 7.5 clockwise turns from the
fully anti-clockwise position.
• The Speed Triple R is delivered from
the factory with the spring pre-load
set at 8.5 clockwise turns from the
fully anti-clockwise position.
Rebound Damping Adjustment -
Speed Triple S
1. Rebound damping adjuster
The rebound damping adjuster is located
at the top of each fork
To change the rebound damping force,
rotate the slotted adjuster clockwise to
increase, or anti-clockwise to decrease.
Always count the number of anti-
clockwise turns from the fully clockwise
position and set both forks to the same
settings.
Note:
• The motorcycle is delivered from the
factory with the rebound set at
2.5 anti-clockwise turns from the
fully clockwise position.
To Next Page
Loading...
Need help?
General
