Maintenance and Adjustment
133
Cleaning
Frequent, regular cleaning is an
essential part of the maintenance of
your motorcycle. If regularly cleaned, the
appearance will be preserved for many
years. Cleaning with cold water
containing an automotive cleaner is
essential at all times but particularly so
after exposure to sea breezes, sea
water, dusty or muddy roads and in
winter when roads are treated for ice
and snow. Do not use household
detergent, as the use of such products
will lead to premature corrosion.
Although, under the terms of your
motorcycle warranty, cover is provided
against the corrosion of certain items,
the owner is expected to observe this
reasonable advice which will safeguard
against corrosion and enhance the
appearance of the motorcycle.
Preparation for Washing
Before washing, precautions must be
taken to keep water off the following
places:
• Rear opening of the exhausts:
Cover with a plastic bag secured
with rubber bands.
• Clutch and brake levers, switch
housings on the handlebars:
Cover with plastic bags.
• Ignition switch and steering lock:
Cover the keyhole with tape.
Remove any items of jewellery such as
rings, watches, zips or belt buckles,
which may scratch or otherwise damage
painted or polished surfaces.
Use separate cleaning sponges or
cleaning cloths for washing
painted/polished surfaces and chassis
areas. Chassis areas (such as wheels
and under mudguards) will be exposed
to more abrasive road grime and dust,
which may then scratch painted or
polished surfaces, if the same sponge or
cleaning cloths are used.
To Next Page
Loading...
Need help?
General
