General Information
38
See page 43 for details on setting the
RIDER Mode options.
Riding Mode Selection
Riding modes may be selected when the
motorcycle is stationary or moving.
When the MODE button is pressed the
riding modes are displayed in the
following sequence:
•RAIN mode
•ROAD mode
•SPORT mode
•TRACK mode
•RIDER mode.
There is a one second time-out when
pressing the MODE button between each
of the modes to allow for further
scrolling to take place.
The selected mode is automatically
activated once the one second time-out
has elapsed, and the conditions for
switching modes have been met.
ABS Options
Road Optimal ABS setting for road
use.
Track Optimal ABS setting for track
use:
Front Wheel – The ABS
system allows increased
front wheel slip when
compared to the Road
setting.
Rear Wheel – The ABS
system is disabled for the
rear wheel, allowing it to lock
under heavy braking.
The ABS warning light will
flash slowly (see page 25).
Off ABS is turned off. The ABS
warning light will be
illuminated (see page 25).
TTC Options
Road Optimal TTC setting for road
use, allows minimal rear
wheel slip.
Track TTC is set up for track use,
allowing increased rear
wheel slip when compared to
the Road setting.
Off TTC is turned off. The TTC
disabled warning light will be
illuminated (see page 26).
After selecting a riding mode, operate
the motorcycle in an area free from
traffic to gain familiarity with the new
settings.
Do not loan your motorcycle to
anyone as they may change the riding
mode settings from the one you are
familiar with, causing loss of
motorcycle control and an accident.
To Next Page
Loading...
Need help?
General
