General Information
62
Seats
Note:
• The passenger seat must be
removed to access the rider’s seat
for removal.
Seat Lock
The seat lock is located on the left hand
side of the motorcycle, on the frame
below the seat.
1. Seat lock
Passenger Seat Removal
To remove the passenger seat, insert the
ignition key into the seat lock and turn it
anti-clockwise while pressing down on
the front part of the passenger seat.
This will release the seat from its lock.
Lift the front of the seat and slide
forwards for complete removal from the
motorcycle.
Passenger Seat Installation
Note:
• The rider’s seat must be correctly
installed before attempting to install
the passenger seat.
To install the passenger seat, position
the rear of the passenger seat to the
rear locator in the rear subframe.
1. Passenger seat
2. Rear locator
3. Seat lock hook
Locate the seat lock hook into the lock
plate assembly and press down to
engage it in the lock. An audible click can
be heard when the seat is correctly
engaged in the lock.
To prevent damage to the seat or
cover, care must be taken not to drop
the seat. Do not lean the seat against
the motorcycle or any surface which
may damage the seat or cover.
Instead, place the seat, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.
To Next Page
Loading...
Need help?
General
