To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Triumph Thunderbird and is the answer not in the manual?
General| Manufacturer | Triumph |
|---|---|
| Displacement | 1699 cc |
| Bore x Stroke | 107.1 mm x 94.3 mm |
| Compression Ratio | 9.7:1 |
| Clutch | Wet, multi-plate |
| Gearbox | 6-speed |
| Frame | Tubular steel, twin spine |
| Front Tyre | 120/70 R19 |
| Rear Tyre | 200/50 R17 |
| Seat Height | 700 mm |
| Fuel System | Fuel injection |
| Final Drive | Belt |
| Front Suspension | Telescopic forks |
| Rear Suspension | Twin shocks, adjustable preload |
| Front Brakes | Twin 310mm floating discs |
| Rear Brakes | Brembo 2-piston caliper |
| Fuel Tank Capacity | 22 L |
| Power | 97 hp (72 kW) @ 5900 rpm |
Explains symbols for important information, warnings, and cautions.
Explains the 'Caution: Refer to the Handbook' symbol and its usage.
Advises using only authorised dealers for maintenance.
Warns against tampering with the noise control system.
Advises reading handbook for operation and carrying it.
States handbook is permanent and must be read before riding.
Warnings on off-road use, towing, and maximum load weight.
Warnings about fuel flammability and poisonous exhaust fumes.
Advises wearing protective gear including helmet and eye protection.
Provides instructions for safe motorcycle parking.
Warns about approved parts and hazards of non-approved ones.
Advises consulting dealers and warns on operating faulty bikes or improper modifications.
Warns about bank angle indicators and risks of unsafe banking.
Warnings against riding fatigued/under influence, stresses licencing, and defensive riding.
Advises operating within speed limits and considering conditions.
Stresses keeping hands on handlebars and using footrests for safety.
Introduces warning labels and shows locations of 'Daily Safety Checks' and 'Coolant' labels.
Details locations of 'Helmet', 'Unleaded Fuel', 'Tyres', and 'Drive Belt' labels.
Warns that removing labels can damage paintwork.
Identifies major external parts of the motorcycle using numbered labels.
Continues identifying parts with numbered labels.
Identifies handlebar controls and dashboard components.
Explains the location of Vehicle Identification Number (VIN) and Engine Serial Number.
Overview of the instrument panel, instruments, warning lights, and switches.
Information about the ignition key, switch, and steering lock.
Identifies and explains switches on both handlebars.
Details fuel requirements, grade, cap, and filling procedures.
Information on side stand, side panels, tool kit, and seats.
Guidance on running-in, daily checks, and safe operation.
Detailed diagram of the instrument panel and its indicators.
Explains the function of the speedometer, tachometer, and odometer/trip meter.
Details the odometer, trip meter, and clock display functions.
Instructions for adjusting the clock and resetting trip meters.
Explains the fuel gauge, low fuel warning, and range to empty display.
Explains Low Oil Pressure, Coolant Temperature, and Engine Management lights.
Explains Turn Indicators, High Beam, Neutral, Low Fuel, Alarm, and ABS lights.
Explains the ABS warning light and potential hazards.
Information on the ignition key, its number tag, spare key, and switch.
Specifies switch location and warns about spare key security.
Explains the operation and functions of the ignition switch positions.
Advises removing key for security and warns about unauthorized use.
Details the steering lock key and its operation.
Warns against storing spare key with the motorcycle for security.
Explains the function and use of the engine stop switch.
Warns against riding with the steering lock engaged.
Identifies and explains switches on the left handlebar.
Explains the operation of the starter button and scroll button.
Instructions for operating the headlight dip switch.
Explains indicator switch, self-cancel system, and fuel system warnings.
Details fuel requirements and specifies the required fuel grade.
Instructions for opening/closing fuel cap and safety warnings for refuelling.
Instructions and precautions for filling the fuel tank, avoiding overfilling.
Information on side stand operation, notes, and warnings against misuse.
Instructions for removing and refitting side panels.
Location and contents of the tool kit and handbook, with storage notes.
Advice on seat care, removal, and warnings about seat detachment.
Instructions for pillion seat removal and warnings about detachment.
Guidance on the initial running-in period for the motorcycle.
General advice for safe operation and essential daily checks.
Instructions for stopping, starting the engine, moving off, and changing gears.
Guidance on proper braking techniques and ABS system usage.
Instructions for safe parking and considerations for high-speed riding.
General checks for steering, luggage, brakes, tyres, fuel, oil, belt, coolant, and electrics.
Instructions on how to safely stop and start the motorcycle engine.
Guidance on moving off, warnings about fumes, starter use, and idling.
Instructions on gear changing and warnings about aggressive acceleration and downshifting.
Guidance on proper braking, avoiding wheel lock, and emergency braking.
General warnings about braking, acceleration, turning, and riding in adverse conditions.
Advises on engine braking, avoiding coasting with engine off, and towing.
Explains ABS function, warning light, limitations, and potential hazards.
Instructions for safe parking and information on ABS warning light behaviour.
Warns about ABS function with non-recommended tyres.
Advice and warnings for operating the motorcycle at high speeds.
Warnings about parking safety, hot engine parts, and petrol flammability.
General checks for steering, brakes, tyres, fuel, oil, belt, and cautions for high speeds.
Advice on checking drive belt, coolant level, and electrical equipment.
Introduces hazards of accessories and additional weight, and warnings about control impairment.
Warns against riding accessory-equipped bikes or loaded bikes above 80 mph.
Advises high-speed operation only on closed courses and passenger safety instructions.
Warns against carrying passengers not tall enough and handling changes with a passenger.
Warns against storing items between frame/handlebars and carrying animals.
Sets limits for objects on passenger seat and speed reduction.
Importance of scheduled maintenance for safe operation.
Details engine oil and coolant system maintenance.
Details throttle, clutch, and brake system maintenance.
Details steering, suspension, windscreen, and other maintenance.
Details final drive belt and tyre maintenance.
Details battery maintenance, charging, and safety precautions.
Emphasizes scheduled maintenance and warns against incorrect procedures.
Chart detailing maintenance tasks and intervals.
Continues the chart detailing maintenance tasks and intervals.
Procedure for checking engine oil level and warnings about oil quality.
Instructions for changing engine oil and filter, with safety warnings.
Environmental advice for oil disposal and required oil specification.
Warnings about raising engine speed before oil circulation and low oil pressure.
Importance of checking coolant level and using corrosion inhibitors.
Warns about toxic chemicals in coolant and never swallowing it.
Procedures for inspecting and adjusting coolant level, with safety warnings.
Instructions for checking radiator hoses and fins, and coolant change advice.
Warns that hard water causes scale and reduces cooling efficiency.
Importance of throttle control, fan safety, and radiator airflow.
Warns about throttle grip free play, control, and potential sticking.
Checks for smooth throttle operation and free play, with adjustment instructions.
Warns about incorrectly adjusted throttle cables causing loss of control.
Checking and adjusting closing cable free play, and overall throttle system checks.
Warns about loose adjuster locknuts and sticking throttles.
Checks for correct clutch lever free play and instructions for adjustment.
Procedure for inspecting brake pad wear and warnings about replacement.
Warns about soft brake lever/pedal feel and defective brakes.
Details brake fluid maintenance, hygroscopic nature, and ABS operation warnings.
Procedures for inspecting and adjusting front and rear brake fluid levels.
Information on brake light switches and warnings about defective lights.
Instructions for cleaning the windscreen and associated cautions.
Details steering and wheel bearings inspection procedures and warnings.
Step-by-step guide to checking steering bearings for play.
Procedure for inspecting wheel bearings and warnings about operation with damaged bearings.
Procedures for inspecting front forks and noting front suspension is not adjustable.
Explains rear suspension spring pre-load adjustment.
Warns about dismantling suspension units containing pressurised oil.
Provides recommended suspension settings based on load.
Details drive belt maintenance and warnings about uneven suspension settings.
Procedure for inspecting drive belt tension using service tool and specifications.
Step-by-step guide for measuring drive belt tension.
Continues step-by-step guide for measuring drive belt tension.
Final steps for measuring drive belt tension and related specifications.
Instructions for adjusting drive belt tension, with safety warnings.
Importance of tyre condition, inflation, and wear for stability.
Information on tyre wear and replacement recommendations.
Specifies minimum tread depth and advice on approved tyre replacement.
Warnings about operating above speed limits and with worn tyres.
Warnings about ABS function with non-recommended tyres and tyre punctures.
Warns against using tube-type tyres or inner tubes in tubeless tyres.
Advises consulting dealer for tyre replacement and stresses wheel balance importance.
Step-by-step battery removal and safety warnings about gases and acid.
Details battery maintenance, disposal, and managing discharge during storage.
Battery acid safety warnings and caution about maintaining charge level.
Advice on battery charging, installation, and safety warnings.
Location of fuse box, identification of fuses, and warnings about using correct fuses.
General headlight information and warnings about beam adjustment and speed.
Instructions for adjusting the headlight beam vertically and horizontally.
Step-by-step guide for replacing headlight bulbs, with safety warnings.
Information on rear light unit and instructions for indicator bulb replacement.
Importance of cleaning, preparation steps, and cautions about areas to protect.
Cautions about water spray areas, soap types, and warnings against waxing brake discs.
Instructions for cleaning, drying, and protecting the exhaust system, with cautions.
Steps to prepare the motorcycle for storage, including fuel and battery.
Warns about petrol flammability and ventilation during storage.
Steps to take after removing the motorcycle from storage.
Lists detailed specifications for the Thunderbird model, including dimensions and weights.
Details engine specifications and oil capacities.
Details coolant, fuel system, and ignition specifications.
Details transmission type, clutch, final drive, and gear ratios.
Lists tyre pressures, approved tyres, and electrical equipment specifications.
Warns against mixing tyre brands or specifications.
Details frame rake, trail, and key tightening torque specifications.
Lists recommended engine oil, brake fluid, coolant, and grease.
