24
General Information
Warning Lights
Low Oil Pressure Warning
With the engine running, if the
engine oil pressure becomes
dangerously low, the low oil
pressure warning light will illuminate.
Note:
• The low oil pressure warning light
will illuminate if the ignition is
switched on without running the
engine.
Coolant Temperature
If the coolant temperature
becomes too high, the high
coolant temperature warning light
will illuminate.
Engine Management
System Malfunction
Indicator Light
The malfunction indicator light for the engine
management system illuminates when the
ignition is switched on (to indicate that it is
working) but should not become illuminated
when the engine is running.
If the malfunction indicator light becomes
illuminated when the engine is running, this
indicates that a fault has occurred in one or
more of the systems controlled by the engine
management system. In such circumstances,
the engine management system will switch to
'limp-home' mode so that the journey may
be completed, if the fault is not so severe that
the engine will not run.
Note:
• If the malfunction indicator light
flashes when the ignition is
switched on contact an authorised
Triumph dealer as soon as possible
to have the situation rectified. In
these circumstances the engine
will not start.
Stop the engine immediately if the low oil
pressure warning light illuminates. Do not
restart the engine until the fault has been
rectified.
Severe engine damage will result from
running the engine when the low oil
pressure warning light is illuminated.
Reduce speed and do not continue to ride
for longer than is necessary with the
malfunction indicator light illuminated. The
fault may adversely affect engine
performance, exhaust emissions and fuel
consumption. Reduced engine
performance could cause a dangerous
riding condition, leading to loss of control
and an accident. Contact an authorised
Triumph dealer as soon as possible to have
the fault checked and rectified.
To Next Page
Loading...
Need help?
General
