Maintenance and Adjustment
150
To replace a bulb:
Remove the rider's seat.
Disconnect the battery, negative (black)
lead first.
Remove the bulb cover from the bulb to
be replaced by rotating it anticlockwise.
Disconnect the multiplug from the bulb.
Detach the bulb retainer from the hook
on the headlight assembly and rotate it
away from the bulb as shown.
Remove the bulb from the bulb retainer.
Installation is the reverse of the removal
procedure.
Position Light Bulb Replacement
1. Fixings
2. Headlight surround
3. Position light bulb
The position light is fitted to the centre
of the headlight. To replace the bulb,
remove the four fixings and remove the
headlight surround, detach the rubber
retainer from the headlight and pull out
the bulb.
Installation is the reverse of the removal
procedure.
Rear Light/Licence Plate Light
Rear Light/Licence Plate Light
Replacement
The rear light unit is a sealed,
maintenance free LED unit. The licence
plate light is integral to the rear light
unit.
The bulbs become hot during use.
Always allow sufficient time for the
bulb to cool before handling. Avoid
touching the glass part of the bulb. If
the glass is touched or gets dirty,
clean with alcohol before reuse.
To Next Page
Loading...
Need help?
General
