General Information
54
Note:
• Cruise control will not function if
there is a malfunction with the ABS
system and the ABS warning light is
illuminated.
• If the ABS system is disabled (see
page 45), the ABS warning light will
be illuminated and cruise control
WILL function.
The cruise control buttons are located
on the right hand switch housing and
can be operated with minimum
movement by the rider.
Cruise control can be switched on or off
at any time but it can not be activated
until all the conditions described on
page 54 have been met.
Activating Cruise Control
Note:
• The cruise control indicator light will
not illuminate until cruise control
has been activated by pressing the
SET/- adjust button.
To turn on the cruise control, press in
the ON/OFF button.
1. Cruise control ON/OFF button
2. Cruise control adjust button, SET/-
3. Cruise control adjust button, RES/+
To activate cruise control, the following
conditions have to be met:
• The motorcycle is travelling at a
speed between 30 to 100 mph (48 to
160 km/h)
• The motorcycle is in 4
th
gear or
higher
• The SET/- adjust button is pressed.
Only operate this Triumph motorcycle
at high speed in closed-course on-
road competition or on closed-course
racetracks. High-speed operation
should only then be attempted by
riders who have been instructed in the
techniques necessary for high-speed
riding and are familiar with the
motorcycle's behaviour in all
conditions.
High-speed operation in any other
circumstances is dangerous and will
lead to loss of motorcycle control and
an accident.