General Information
60
Left Handlebar Switches
1. Headlight dip switch
2. Direction indicator switch
3. Horn button
4. Pass button
5. Instrument SCROLL button
6. Instrument SET button
7. Heated grips switch (if fitted)
Headlight Dip Switch
High or low beam can be selected with
the headlight dip switch. To select high
beam, push the switch forward. To select
low beam, push the switch rearwards.
When the high beam is turned on, the
high beam indicator light will illuminate.
1. Headlight dip switch
Note:
• A lighting ON/OFF switch is not
fitted to this model. The position
light, rear light and licence plate light
all function automatically when the
ignition is turned to the ON position.
• The headlight will only function
when the ignition switch is turned to
the ON position and the engine is
running.
An alternate way to turn on the
headlight, without the engine
running, is to pull in the clutch lever
then turn the ignition to the ON
position. The headlight will be on and
remain on when the clutch lever is
released.
The headlight will go off while
pressing the starter button until the
engine starts.