General Information
80
To adjust the windscreen height, loosen
both adjuster knobs sufficiently to allow
the adjustment blocks to slide over the
adjustment plates.
1. Windscreen
2. Adjuster knob (right hand side
shown)
3. Adjustment block
4. Adjustment plate
Position the windscreen to the desired
height, ensuring both adjustment blocks
are set to the same position.
Tighten the adjuster knobs to secure
the windscreen in position.
Tool Kit and Handbook
The tool kit is located under the pillion
seat and is secured with a rubber strap.
The handbook assembly is located in a
slot in the base of the pillion seat.
Helmet Hook
A helmet can be secured to the
motorcycle using the helmet hook
located on the left hand side of the
motorcycle, beneath the rider's seat.
1. Helmet hook