2-2 Electrostatic Classifier Model 3082 and SMPS Spectrometer Model 3938
Table 2-2 lists the components included in the 3082 Accessory Kit.
Table 2-2
3082 Accessory Kit
Part Number/
Model Number
Impactor kit and certificates
Conductive tubing, 1/4-inch
Conductive tubing, 3/8-inch
Neutralizer retainer bracket
8-32 socket-head cap screws (extra)
8-32 truss-head screws (extra)
1-207 conductive O-rings (inlet/impactor face seal)
1-017 O-rings (impaction plate radial seal)
RS-232 cable (goes between Classifier and CPC)
If the 3082 is purchased as part of a 3938 SMPS system, you will receive
an additional SMPS accessory kit and AIM3938 Aerosol Instrument
Manager
®
software. Table 2-3 lists the components included in the SMPS
Accessory Kit.
Table 2-3
1035990 SMPS Spectrometer Accessory Kit
Part Number/
Model Number
In order to convert a 3081 Long DMA into a 3081A Long DMA
(recommended), you must purchase the 3081U upgrade kit. Table 2-4 lists
the components included in the Model 3081A Long DMA upgrade kit.
Table 2-4
3081U Long DMA Upgrade Kit
Part Number/
Model Number
DMA base plate with memory chip (unprogrammed)
SS Swagelok 1/8 mnpt x ¼ tu
To Next Page
Loading...
Need help?
General
