Ubee UBC1301-AA00 User Manual

Ubee Interactive Using the CM Info Option
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017 26
4.1.3 Using the Event Log Option
The Event Log option displays a log of events regarding the UBC1301-AA00’s connection
status.
To view event log information:
1. Click CM Info from the left side menu.
2. Click Event Log under CM Info.
Field descriptions are listed below the screen example.
Modulation Profile ID
Displays the modulation method required for the downstream channel to lock on to by
device. This method is determined by the service provider.
Correctables Displays the quantity of codewords which are correctable.
Uncorrectables Displays the quantity of codewords which are not correctable.
CM Upstream Channel Info
Channel Numbers the upstream channels.
Lock Status Displays if the device has locked successfully to an upstream channel.
Channel Type Displays the channel type.
Channel ID Displays the current upstream channel ID.
Frequency Displays the current upstream frequency in hertz.
Width Displays the channel width.
Power Displays the current upstream transmit power in decibel millivolts (dBmV).
Modulation/Profile ID
Displays the modulation method required for the downstream channel to lock on to by
the device. This method is determined by the service provider.
CM IP Info
CM IP Address Displays the UBC1303-AA00’s IP address.
Duration Displays the time the device has been active.
Expires Displays when the cable modem’s certificate expires.
Label Description

Ubee UBC1301-AA00 Specifications

General

Brand	Ubee
Model	UBC1301-AA00
Category	Gateway
Language	English