Ubee UBC1301-AA00 User Manual

Ubee Interactive Using the WLAN Option
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017 41
6.2.3 Using the DHCP Lease Option
Use the DHCP Lease option to view current LAN DHCP lease information.
To view DHCP lease settings:
1. Click LAN from the left side menu.
2. Click DHCP Lease under LAN.
Field descriptions are listed below the screen example.
6.3 Using the WLAN Option
Use the WLAN (wireless local area network) option to configure wireless network settings.
For assistance in deploying and troubleshooting the wireless network, refer to Deploying
and Troubleshooting the Wireless Network on page 50.
To view and configure wireless information:
Enable Rapid
Commit
Enables Rapid Commit. When enabled, the server recognizes this option in Solicit messages
sent from the DHCPv6 client. The server and client then use a two-message exchange (Solicit
and Reply) to configure clients, rather than the default four-message exchange (Solicit,
Advertise, Request, and Reply). This provides faster client configuration when networks are
under heavy traffic loads.
Enable Unicast
Enables Unicast, which is disabled by default. Unicast transmission is defined to be between a
single sender and a single user over a network.
Save/Apply Saves changes.
Label Description
Hostname Displays the host name.
MAC Address Displays the IP address of the client.
IP Address Displays the MAC address of the client.
Expires in Displays the time until the DHCP lease expires.
Label Description

Ubee UBC1301-AA00 Specifications

General

Brand	Ubee
Model	UBC1301-AA00
Category	Gateway
Language	English