Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017 1
1Introduction
Welcome to the Ubee family of data networking products. This guide is specific to the
UBC1301-AA00 Advanced Wireless Voice Gateway for cable service provider
subscribers and serves the following purposes:
Provides instructions on how to install, connect, and operate the UBC1301-AA00.
Provides directions for accessing the Web user Interface (UI) for configuration and
management of the device.
Defines all relevant device compliance standards and physical specifications.
Provides a glossary to define technical terms and acronyms. Refer to the Glossary on
page 88.
See the following topics:
Safety and Regulatory Information on page 1
Application Example on page 3
Requesting Support on page 3
Device Package Components on page 4
Device Panels, Connections and LEDs on page 5
Specifications, Standards, and Firmware on page 7
Default Values and Logins on page 9
Device Label on page 10
1.1 Safety and Regulatory Information
Use the following information to better understand safety and regulatory standards to
install, maintain, and use the UBC1301-AA00 Advanced Wireless Voice Gateway.
1.1.1 Safety
WARNING: The following information provides safety guidelines for anyone
installing and maintaining the UBC1301-AA00. Read all safety instructions in
this guide before attempting to unpack, install, operate, or connect power to
this product. Follow all instruction labels on the device itself. Comply with the
following safety guidelines for proper operation of the device.
Follow basic safety precautions to reduce the risk of fire, electrical shock, and
injury. To prevent fire or shock hazard, do not expose the unit to rain and
moisture or install this product near water. Never spill any form of liquid on or
into this product. Do not use liquid cleaners or aerosol cleaners on or close to
this product. Clean with a soft dry cloth.
To Next Page
Loading...
Need help?
General
