Setting the Horizontal System
You can use the horizontal control knobs to change
the horizontal graticule (time base) and trigger the
horizontal position of the memory (triggering
position). Changing the horizontal graticule will cause
the waveform to increase or decrease in size relative
to the screen centre. When the horizontal position
changes, the position with respect to the waveform
triggering point is also changed.
Horizontal position : Adjust the horizontal positions of
channel waveforms (including math waveforms).
Resolution of this control button changes with the
Horizontal scaling : Adju
st the main time base, i.e
SEC/DIV. When time base extension is on, you can
use the horizontal scaling knob to change the delay
scanning time base and change the window width.
Two horizontal control knobs : Use the knob
to change horizontal time base graticule and use
the horizontal knob to change the
relative position if the triggering point on the
screen For instructions on how to display the
horizontal menu see Table
Horizontal controls menu : Horizontal menu display
To Next Page
Loading...
Need help?
General
