Vector display fills the space
between adjacent sampling points in display. The dot
mode displays only the sampling points
Refresh rate is the number of
times the digital storage oscilloscope refreshes the
waveform display per second. The refreshing speed
affects the capability to observe signal movements
As shown below, the [ ] button in the control
zone is the function key for the storage system
Press the [ ] button to display the storage
setup menu. You can use this menu to save
waveforms or setup status of the oscilloscope in the
internal memory or the USB device, and recall any
ored waveform through RefA (or RefB), or press
[ ] to recall the setup status. When the USB
device is inserted, you can store the oscilloscope s
waveform display in bitmap format on the USB device.
Figure 2-24 Function key for the sampling
To Next Page
Loading...
Need help?
General
