Utax CD 1030 User Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
7-25
(5) Turning the copy management function ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF.
1
Access the copy management menu screen.
(See “(2) Accessing the copy management menu screen” on
page 7-3.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
To turn copy management ON, touch the “On” key. To turn
copy management OFF, touch the “Off” key.
Inch specifications
Close
Each Mgt.
To ta l
Management
total
Managem. Total
Default setting
Register/Sett.
Management
Def. Set.
Management
edit
Off
On
Management code menu
Management
Metric specifications
Close
Each Mgt.
To ta l
Management
total
Managem. Total
Default setting
Register/Sett.
Management
Def. Set.
Management
edit
Off
On
Management code menu
Management
3
Touch the “Close” key.
(6) Changing the copy management default settings
Perform the following procedure when you want to change the default
settings for the copy management function.
The following default settings are available.
• Copier function management ON/OFF (Page 7-26.)
• Printer function management ON/OFF (Page 7-27.)
• Printer error report (Page 7-28.)
• Non-standard printer driver printout (Printer) (Page 7-29.)
• Copy/Printer output management (Page 7-30.)
• Scanner function management ON/OFF (Page 7-31.)
• Fax function management ON/OFF (Page 7-32.)
• Response to exceeded restriction (Page 7-33.)
• Default copy limit (Page 7-34.)
•Total count for specified paper size (1 to 5) (Page 7-35)
● Accessing the copy management default settings
1
Access the copy management menu screen.
(See “(2) Accessing the copy management menu screen” on
page 7-3.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter

Utax CD 1030 Specifications

General

Brand	Utax
Model	CD 1030
Category	All in One Printer
Language	English