Utax CD 1030 User Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
7-64
● Original quality
Perform the following procedure to determine the default setting that
will be used for the image quality in the initial mode.
1
Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-61.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Original image quality” [“Image quality Original”] in
the settings list on the left side of the touch panel and then
touch the “Change #” key.
The “Original image quality” [“Image quality Original”] screen
will be displayed.
Inch specifications
Copy default
Default setting
Exposure mode
Exposure steps
Original image quality
Eco Print
Background exp. adj.
Manual
1 step
Text + Photo
Off
Standard
Default menu
Down
Change #
Setting mode
Up
Close
Default setting / Counter
Metric specifications
Copy default
Exposure mode
Exposure steps
Image quality original
Eco Print
Background exp. adj.
Manual
1 step
Text + Photo
Off
Standard
Default menu Setting mode
Up
Down
Change #
Close
Default setting
Default setting / Counter
3
Touch the “Text+Photo” key, the “Photo” key or the “Text” key,
as appropriate.
Inch specifications
Select default mode of original image quality.
Tex t
Photo
Default setting - Copy default
Original image quality
CloseBack
Text + Photo
Metric specifications
Select default mode of original quality.
Back Close
Text+Photo
Photo
Tex t
Image quality original.
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4
Touch the “Close” key. The touch panel will return to the
screen in step 2.
5
Touch the “Close” key once again. The touch panel will return
to the “Default setting”screen.
6
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.

Utax CD 1030 Specifications

General

Brand	Utax
Model	CD 1030
Category	All in One Printer
Language	English