Utax CD 1030 User Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
7-37
(7) Making copies when copy management is turned
ON
When copy management is turned ON, copying will only be possible
when a valid department ID-code is entered.
IMPORTANT!
Once you are finished copying, BE SURE to press the [Management]
key so that the “Enter ID-code” screen is displayed again.
1
Use the numeric keys on the keypad to enter your
department ID-code, and then touch the “Enter” key.
The “Basic” screen will be displayed.
Inch specifications
Clear
Enter
Each Mgt.
Total
Enter ID-code.
****
Metric specifications
Clear
Enter
Each Mgt.
Total
Enter ID-code.
****
NOTES
• If you enter the wrong ID-code, touch the “clear” key and reenter the
correct ID-code.
• If an invalid (unregistered) department ID-code is entered, an error
alarm will sound. Enter the correct ID-code.
• If you enter your department ID-code and touch the “Each Mgt.
Total” key, you can check the copy counts for your own department.
Inch specifications
Close
Each Management Total
Default setting - Management code menu 0007 1st Sales Dept.
Number print.
Number in( )
is limit value
50
50
30
30
80
80
100 100
1Hrs 10Min
Copy Printer
Scanner Fax
Total
Scan.Transm. Fax Transm.
Black & White:
To ta l:
Scan # pages: Trsm. # pages:
Commun.Time:
Metric specifications
Close
Each Management Total
Default setting - Management code menu 0007 1st Sales Dept.
Number print.
Number in( )
is limit value
50
50
30
30
80
80
100 100
1Hrs 10Min
Copy Printer
Scanner Fax
Total
Scan.Transm. Fax transm.
Black & White:
To ta l:
Scan # pages: Trsm. # pages:
Commun.Time:
2
Perform the desired copy operation as usual.
3
Once you are finished copying, press the [Management] key.

Utax CD 1030 Specifications

General

Brand	Utax
Model	CD 1030
Category	All in One Printer
Language	English