Utax CD 1030 User Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
7-72
● Auto exposure adjustment
Perform the following procedure to adjust the overall exposure level
for the auto exposure mode.
1
Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-61.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Auto exposure adj. (Auto)” in the settings list on the
left side of the touch panel and then touch the “Change #”
key.
The “Auto exposure adj. (Auto)” screen will be displayed.
Inch specifications
Copy default
Change #
Default setting
Auto exposure adj.(Auto)
Auto exposure adj.(OCR)
Manual exp. adj.(Mixed)
Manual exp. adj.(Text)
Manual exp. adj.(Photo)
Standard
Standard
Standard
Standard
Standard
Default menu
Down
Setting mode
Up
Close
Default setting / Counter
Metric specifications
Default setting / Counter
Copy default
Up
Down
Change #
Close
Default setting
Default menu Setting mode
Auto exposure adj.(Auto)
Auto exposure adj.(OCR)
Manual exp. adj.(Mixed)
Manual exp. adj.(Text)
Manual exp. adj.(Photo)
Standard
Standard
Standard
Standard
Standard
3
Touch the “Lighter” key or the “Darker” key, as appropriate, to
move the cursor on the exposure scale and adjust the
exposure as desired.
Inch specifications
Adjust copy exposure default setting. (Auto)
Auto exposure adj.(Auto)
Default setting - Copy default
Lighter
Darker
CloseBack
Metric specifications
Adjust default setting of copy exposure. (Auto)
Back
Close
Auto exposure adj.(Auto)
Default setting - Copy default
Lighter
Darker
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4
Touch the “Close” key. The touch panel will return to the
screen in step 2.
5
Touch the “Close” key once again. The touch panel will
return to the “Default setting”screen.
6
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.

Utax CD 1030 Specifications

General

Brand	Utax
Model	CD 1030
Category	All in One Printer
Language	English