Section 8 OPTIONAL EQUIPMENT
8-5
(2) Paper Feeder
Two Paper Feeders of the same type as drawer[cassette] in the main
body can be added.
Capacity and the paper loading method is the same as those for the
standard drawer[cassette] in the main unit.
* Paper misfed in the optional Paper Feeder can be removed by
opening its left cover.
(3) Paper Feeder
The Paper Feeder holds up to 3,000 sheets of 11" x 8 1/2" [A4 or B5
(B5 is for Asia-Pacific specification copiers only)] size standard paper.
Pull the Paper Feeder out towards you as far as it will go, and then
load up to 1,500 sheets of paper in each rows.
* The cover on the left side of the Paper Feeder is prepared to remove
misfed paper.
(4) Document Finisher
This unit lets you store a large volume of copies and shifts the
position of each copy set for ease of sorting. It can staple finished
copy sets and bind them. It is also possible to use the Document
Finisher to punch holes in them for filling purposes (optional). For
more detailed information, refer to the Operation Guide for the
Document Finisher.
IMPORTANT!
• If copies come out curled or are tacked unevenly, turn the paper in
the drawer[cassette] over.
• When copying onto special paper such as OHP film and other
transparencies, use Non-sort mode.
11
11
1 Copying in the Sort:ON mode
This mode automatically sorts copies made from multiple originals
into sets identical to the originals.
1
Touch the “Sort/Finish” key.
The “Sort/Finished” screen will appear.
Inch specifications
To Next Page
Loading...
Need help?
General
