6
1.3 Warning and safety instructions
An extreme care must be paid when operating this system, since this involves high voltage,
electrical parts inside unit.
To use and operate your panoramic unit and your digital imaging software you must follow the
instructions contained in this manual.
Most of all, the following two things cannot be overstated.
Never expose this equipment to watery material or spray that may lead
to an electrical shock or a damage of equipment.
A small amount of Laser beam could lead to permanent eye injuries.
For maximum safety, advise the patient not to look into the laser beam
directly. And while making adjustments; be sure that beam is not
directed into the patient’s eyes.
1. You are responsible for the operation and maintenance of this unit. Only legally qualified
persons can operate this unit. DO NOT open the cover of the unit.
When necessary, have a trained authorized service technician carry out inspection and
maintenance operations.
2. Install this Unit in an x-ray room that complies with current installation standards. From
this location, you must be able to maintain visual or audio communication with the
patient. This Unit must be permanently connected to the ground with a fixed power
supply cable.
3. DO NOT place the PC and the peripheral equipment connected to it in the immediate
vicinity of the patient in the Unit. Leave at least 1.5 m distance between the patient and
the Unit.
To Next Page
Loading...
Need help?
General
