1.08 Frame
Type Central frame
Seams Electrical and autogenic welding seams
Stand Sidestand on left side of floorboard
1.09 Body
Front Fender, Legshield, headlight with casing,
instrument panel
Floor and Rear Floorboard made from GA1-alloy, Rear hood
with removable toolbox and tippable seats, that
can be locked
Number of seats 2
1.10 Equipment
Speedometer Installed on instrumentpanel with nightlight
Propulsion through the front wheel
Tools Under the seats in the rear hood
1.11 Measurements and weights
Maximum length 2080mm
Maximum width 650mm
Maximum height 950mm
Wheelbase 1430mm
Ground clearance 110mm (loaded)
Wading capability 240mm
Turning circle 4.0 Meters
Weight 140Kg (309lbs.)
Dry curb weight 131Kg (289lbs.)
Maximum weight 300Kg (662lbs.)
Pressure on front axle
unloaded 51Kg (112lbs.)
loaded 100Kg (221lbs)
Pressure on rear axle
unloaded 84Kg (185lbs.)
loaded 200Kg (442lbs.)
Avg. Fuel consumption 2.8liters/100Km (85mpg)
Fuel consumption at speeds
of 40Km/h (25mph) 2.1l/100Km (112mpg)
of 50Km/h (31mph) 2.4l/100Km (99mpg)
of 60Km/h (37.5mph) 2.9l/100Km (82mpg)
Top speed 82Km/h (51mph)
Continous top speed 75Km/h (47mph)
climbing ability (single driver) 1
st
gear 33% (30º) at 15Km/h (9.5mph)
2
nd
gear 18% (16º) at 30Km/h (19mph)
3
rd
gear 12% (11º) at 50Km/h (31mph)
4
th
gear 5% (4.5º) at 60Km/h (37.5mph)
To Next Page
Loading...
General