2.351 Flat tire
Removing the front wheel:
a) Tilt the scooter sideways and let it rest on the edge of the florboard.
b) Remove speedo cable and brake cable from the armature plate
c) Loosen axle nuts
d) Remove wheel
e) The wheel will be ready for tire installation, after having removed the five wheel
nuts.
Image 42. Removing the front tire
Removing the rear wheel:
a) Remove hood. (Screw of knurled screw and the two nuts)
b) loosen wheel nuts and rod axle
c) Tilt the scooter sideways and let it rest on the edge of the florboard.
d) Unscrew rod axle.
e) Remove bushing and unscrew wheel nuts
f) Remove rear wheel
To Next Page
Loading...