the fuel tap´s reserve setting. The fuel tank is installed on the hood mount and affixed with a
tensioning belt. The fuel tap is installed on the left hand under side of the tank.
2.361 Cleansing the fuel filter
The fuel filter is part of the fuel tap.
The fuel filter filters dirt particles before they can get into the floater housing of the carburetor. To
avoid reduced flow rate, the filter should be cleased regularly.
To cleanse the filter, it needs to be removed from the fuel tap by unscrewing it. After removing the
screen from the filter housing, both parts are washed out in benzine. When reinstalling the filter into
the fuel tap, insure that the filter housing seal is in place and undamaged.
Image 45. Cleansing the fuel filter
To Next Page
Loading...
General