Electronic lever control
Operation
Both the shift function and engine speed control are
controlled using the lever control.
N = Neutral position (Drive-unit is disengaged and
the engine runs at idle speed).
F = Reverse gear engaged for movement ahead.
R = Reverse gear engaged for movement astern.
T = Adjustment of engine speed.
NOTE! The engine can only be started if the Control
lever is in the neutral position.
Disengaging the shift function
The shift function can be disengaged so that the con-
trol lever only affects the engine speed.
1. Move the lever to the neutral position (N)
2. Press the neutral button (N) in and hold it down
while moving the control lever forward to the shift
position (F).
3. Release the neutral button. The green indicator
begins to fl ash to acknowledge that the shift func-
tion is disengaged.
The lever now only controls engine speed.
When the lever is moved back to the neutral position
it will automatically re-engage. This is confi rmed by
the green indication which gives constant light.
WARNING! Take care not to engage the drive-
unit unintentionally.
38
Controls
To Next Page
Loading...
Need help?
General
