WAGO smartPRINTER User Manual

smartPRINTER Operating Instructions
smartPRINTER Operating Instructions 003/10.2017 15
6.4 Print Media
6.4.1 Basic Requirements of the Ink Ribbon
Only use ink ribbons from the WAGO product portfolio.
Only these products have been comprehensively tested and optimized for use with print materials, the
smartPRINTER and the printing software.
Ink ribbon product information: 258-5005
Ink ribbon product information: 258-5014
For printing on print materials with item numbers: 211-855 / 211-856 / 211-857
6.4.1 Ink Ribbon Storage
 Storage period: one year from invoice date
 Store the ink ribbon at a temperature between 10 ° and at most 35 ° Celsius.
 Store the ink ribbon at a humidity between 30 % and 80 %, non-condensing.
 Protect the ink ribbon against direct sunlight.
 Avoid pressure on the ink ribbon layers.
6.4.2 Preparing the Ink Ribbon
Wind the ink ribbon around the circumference of the cardboard core at least twice.
Turn the cardboard core inwards in the direction of the ink ribbon spool.
If you are using a cardboard core that is not attached to the ink ribbon with adhesive, place the self-
adhesive surface of the cardboard core on the ink ribbon end and turn the cardboard core in the
direction of the ink ribbon spool.
Ink ribbon
Quality
Resin
Length
74 m
Width
50 mm
External core diameter
33 mm
Internal core diameter
12.7 mm
Ink ribbon
Quality
Resin
Length
74 m
Width
50 mm
External core diameter
33 mm
Internal core diameter
12.7 mm

WAGO smartPRINTER Specifications

General

Brand	WAGO
Model	smartPRINTER
Category	Printer
Language	English