WAGO smartPRINTER User Manual

smartPRINTER Operating Instructions
smartPRINTER Operating Instructions 003/10.2017 6
4. Use/Operating Personnel
4.1 Intended Use
The printer has been constructed according to the state of the art and standard safety engineering
practice. Despite this, there is always a risk to life and limb to the user or third parties or of damage to
the device or other property when the device is used.
The printer may only be used when it is in a technically sound condition and when used as intended,
taking into account the safety and risk information, in compliance with these operating instructions.
The printer is designed solely for printing on suitable printing materials approved by the manufacturer.
Uses other than the intended use described here, or going beyond the scope described here, are
considered “improper use.”
The manufacturer/supplier is not liable for any damage resulting from improper use; this risk is borne
solely by the user.
Intended use also includes following these instructions.
4.2 Who Is Permitted to Operate This Printer?
Anyone who has read and understood these instructions is permitted to operate the printer.
The printer must not be operated by children or by frail or infirm persons without supervision.

WAGO smartPRINTER Specifications

General

Technology	Thermal transfer
Print Resolution	300 dpi
Connectivity	USB, Ethernet
Material	Plastic
Supported Media Types	Labels

Summary

Use/Operating Personnel

Intended Use

Who Is Permitted to Operate This Printer?

Safety Information

Safety Markings

Explains warning and mandatory action symbols used in the manual.

Safety Information

Stresses the importance of observing safety regulations and instructions.

Special Safety Information

Details specific safety precautions related to power, environment, and usage.

Product Information

Technical Data

Basic Requirements of the Ink Ribbon

Specifies WAGO ink ribbons and their product information.

Ink Ribbon Storage

Preparing the Ink Ribbon

Inserting the Ink Ribbon

Step-by-step guide on how to insert the ink ribbon spool into the printer.

Label Roll Storage

Storage of Markers/WMB Inline

Storage of Marking Strips

Processing Label Rolls

Processing Markers/WMB Inline

Processing Marking Strips

Inserting Label Rolls

Step-by-step guide for safely inserting label rolls into the printer.

Using Markers/WMB Inline

Provides instructions for safely using markers and WMB Inline with the printer.

Calibrate Print Materials

Explains the calibration process for print materials.

GoDoctor Software

Explains how to use GoDoctor software for calibration.

Auto-calibration button

Describes how to use the printer's auto-calibration button.

Stages of Service Life

Mounting

Installing and Removing the Roller

Detailed steps for removing and installing the printer roller.

Hard- und Software requirements

Connection to the Printer

WAGO Printer Settings - Activate the Cutter

Guide on configuring the WAGO Printer Settings software to activate the cutter.

Commissioning and Installation

Printer Driver Installation

Instructions for installing the printer driver.

Single-user Installation via USB

Step-by-step guide for installing the printer via USB.

Network Installation without Use of DHCP Server

Guide for setting up the printer on a network without DHCP.

Network Installation with Use of DHCP Server

Installing the WAGO Printer Settings

Cleaning and Maintenance by the User

General Cleaning

Cleaning the Print Roller

Cleaning the Label Sensor

Cleaning the Print Head

Procedure and precautions for cleaning the print head.

FAQ - Fault Description & Troubleshooting