WAGO smartPRINTER User Manual

smartPRINTER Operating Instructions
smartPRINTER Operating Instructions 003/10.2017 22
6.5.9 Calibrate print materials
GoDoctor Software
You can use the GoDoctor software to start, track and evaluate the calibration process (measure print
material) on your monitor.
Check the result with the information in our handling instructions for your print material and thus avoid
misprints due to incorrect calibration.
Always use the most up-to-date version of the software. Check your existing installation to make sure
that it is up to date, or download the newest version:
Link: www.wago.com/smartprinter
The program file GoDoctor.exe can be found in the smartSCRIPT installation directory on your PC /
laptop.
C:/Programme(86)/Wago/smartScript/…
Auto-calibration button
You can start the calibration process (measure print material) on your smartPRINTER with the auto
calibration button.
Press and hold the Auto-calibration button for 1 second.
The printer automatically detects the print material.
Note that calibration via the Auto-calibration button does not confirm whether the print material has
been calibrated correctly.
To check the calibration, run a test print.

WAGO smartPRINTER Specifications

General

Brand	WAGO
Model	smartPRINTER
Category	Printer
Language	English