88 Freedom SW Owner’s Guide
Troubleshooting
Troubleshooting the Freedom SW via the SCP
The Freedom SW is designed with a number of protection
features to provide efficient operation. If, however, you have
any problems operating your inverter/charger read this
troubleshooting chapter.
If you cannot resolve the problem, record the information
about your system. This information will help your dealer or
customer service to assist you better when you contact them.
When a detected fault or warning message appears, you can
acknowledge the message to clear the screen. To
acknowledge a fault or warning message, press the Enter
button on the SCP. This action does not clear the fault or
warning condition, so you should consult “Detected Fault
Messages” on page 91 and “Detected Warning Messages” on
page 100 for suggested actions after you have acknowledged
the message. Refer to the Xanbus System Control Panel
Owner’s Guide for more information on detected faults and
warnings.
Detected Fault Types
There are three types of detected fault messages: automatic
faults, manual faults, and escalating automatic faults. Table 1
describes how they differ in their behavior and how you can
respond to them when they appear on the SCP.
ELECTRICAL SHOCK HAZARD
Do not disassemble the inverter/charger. The Freedom SW contains no
user-serviceable parts.
Failure to follow these instructions will result in death or serious injury.
Table 1 Detected Fault Types and Behaviors
Fault type Behavior
Automatic
fault
Clears automatically if the detected
condition that generated the message goes
away. You can also acknowledge
automatic faults without waiting for them
to clear automatically.
FSW Owners Guide.book Page 88 Tuesday, August 7, 2018 9:03 AM
To Next Page
Loading...
Need help?
General