Xantrex Freedom SW Series User Manual

97-0019-01-01 31
Operating the Freedom SW with the SCP
Viewing the Firmware Revision Number
You may need to view the firmware revision number (F/W
Rev.) of the Freedom SW when troubleshooting the unit with
authorized service personnel.
To view the firmware revision number:
1. From the System Status screen, press the Enter
button.
The Select Device menu screen appears.
2. From the Select Device screen, press the Enter
button.
The System Settings menu screen appears.
3. From the System Settings screen, press the down
arrow button to highlight View Device Info
4. Press Enter.
The Device Info screen appears.
5. Read the displayed information.
The series of numbers and letters opposite F/W Rev. is
the firmware revision number.
6. Press Func (3x) to return to the System Settings
menu.
To view the F/W Rev. from the System Status screen:
Select Device
System Settings
FSW3012 00
XAGS 00
XSCP
Device Info
FSW3012
Model #
Serial #
F/W Rev.
815-3012
100529833000
1.00.00 BN 107
System Settings
View Fault List
View Warning List
Clear All Flts/Wrns
View Device Info
System Status
Battery
BatLev
Load
AC In
12.1V -257A 84”F
Invert
120V 12A
0V 0A
menu EnInv EnChg Shr
System Settings
Invert
AC Charge
System Mode
Cascading [Enabled]
Device Name
Model Number
Serial Number
Firmware Revision Number
12
34
5
6
FSW Owners Guide.book Page 31 Tuesday, August 7, 2018 9:03 AM

Xantrex Freedom SW Series Specifications

General

Brand	Xantrex
Model	Freedom SW Series
Category	Inverter
Language	English