32 Freedom SW Owner’s Guide
Operating the Freedom SW with the SCP
Setting the Time and Date
Freedom SW advanced features such as time-stamped events
(faults, warnings, and logged historical data) require that the
system be set to the correct time. The Xanbus SCP has an
internal clock that controls the time for all Xanbus-enabled
devices in the system. You can set the time, time format, and
date on the Clock menu. The Clock menu is accessible on
the Select Device menu.
For more information, see refer to the Xanbus SCP Owner’s
Guide.
Using the STBY/ON Fault Clear Button
The STBY/ON Fault Clear button has two functions.
The STBY/ON Fault Clear is used to clear active faults on
the system if pressed momentarily. It also toggles all Xanbus-
enabled devices on the system between Operating and
Standby (Power Save) mode when held down for more than
five seconds.
Figure 15 Xanbus SCP STBY/ON Fault Clear Button
STBY/ON Fault Clear
Button
FSW Owners Guide.book Page 32 Tuesday, August 7, 2018 9:03 AM
To Next Page
Loading...
Need help?
General