Xantrex Freedom SW Series User Manual

97-0019-01-01 75
Configuring the Freedom SW using the SCP
To store the state of the inverter to memory:
1. Press and hold the STBY/ON Fault Clear button on the
SCP for more than five seconds to switch to Standby
(Power Save) mode.
2. Select Advanced Settings on the SCP. See “To select
the Advanced Settings menu screen:” on page 53.
3. On the Advanced Settings menu, select Adv
Features.
4. On the Advanced Features menu, select
StoreInvState.
5. Press Enter and use the Up and Down arrow buttons to
change the setting to Enabled.
6. Press Enter again to choose the selection.
7. Press Func until you return to the System Status
screen.
8. Press and hold the STBY/ON Fault Clear button on the
SCP for more than five seconds to switch back to
Operating mode.
FSW Owners Guide.book Page 75 Tuesday, August 7, 2018 9:03 AM

Xantrex Freedom SW Series Specifications

General

Brand	Xantrex
Model	Freedom SW Series
Category	Inverter
Language	English