Problem Solving
7-42 Xerox 4112/4127 EPS
User Guide
Paper jams at lever 2b and knob 2c
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the right cover on the
light finisher.
2. Move lever 2b, turn knob 2c to the right, and remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
3. Return lever 2b to the original position.
4. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.
To Next Page
Loading...
Need help?
General