Problem Solving
7-52 Xerox 4112/4127 EPS
User Guide
Paper jams at lever 1d
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Open the front cover of the high capacity feeder unit.
2. Move lever 1d upwards and remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
3. Return lever 1d to the original position.
4. Close the front cover of the high capacity feeder unit completely. The machine will not
operate if the cover is open even slightly.
To Next Page
Loading...
Need help?
General