Product overview
1-12 Xerox 4112/4127 EPS
User Guide
About the circuit breaker
In the event of a current leakage, the circuit breaker automatically turns off the machine power
to prevent any damage or fire.
If the breaker is in the Off ( ) position, contact your Customer Support Center, as some
abnormal conditions may exist.
Power Saver Mode
The Power Saver feature has two modes; Low Power Mode and Sleep Mode.
The machine automatically enters the Low Power Mode after the preset time has elapsed if the
machine is left unused for a fixed period of time.
The machine then enters the Sleep Mode if a further preset time elapses.
Here are two examples:
• If Low Power Mode is set to 15 minutes and Sleep Mode is set to 60 minutes, Sleep Mode
activates after 60 minutes of total inactivity, not 60 minutes after Low Power Mode begins.
• If Low Power Mode is set to 15 minutes and Sleep mode is set to 20 minutes, Sleep Mode
activates 5 minutes after Low Power Mode begins.
Exiting the Power Saver Mode
The Power Saver Mode is exited by pressing the Energy Saver button or when the machine
receives print data.
Customer documentation updates
You can get the latest customer documentation updates for your product by going to
www.xerox.com
. Be sure to periodically check this website for the latest information for your
product.
Normally
On
Off
Position
Energy Saver
button
To Next Page
Loading...
Need help?
General