Addendum
Xerox 4112/4127 EPS 9-31
User Guide
Specifications
Paper guidelines
• Stacker Tray will accept 64-280 gsm (either coated or uncoated stock) with the possibility
of degraded stock quality and increased jam rate
• Transparencies may be run to either the Top Tray or the Stack Tray. Stack height should be
limited to 100 transparencies.
• Coated paper lighter than 100 gsm may not run as reliably as coated paper heavier than
100 gsm.
• Non-standard papers longer than 305 mm (12") in the feed direction require 210 mm (8.3")
minimum measurement across the feed direction.
• Non-standard papers shorter than 254 mm (10”) in the cross-feed direction require 330
mm (13”) minimum measurement in the feed direction.
Electrical
100V to 240V
Frequency: 50/60 Hz
Temperature and humidity
10 to 32°C, 15 to 85RH
50 to 90°F, 15 to 85RH
Note
Above 82°F (28°C), reduced humidity is required to maintain the specified performance.
To Next Page
Loading...
Need help?
General