Specifications
Xerox 4112/4127 EPS 8-7
User Guide
Standard Finisher specifications
Item Specification
Tray Type • Output Tray: Collated/Uncollated
• Finisher Tray: Collated/Uncollated (Offset available)
• Booklet Tray: Collated/Uncollated
Supported Paper Size Top Tra y:
• Maximum: A3, 12.6 x 19.2î (330 x 488 mm)
• Minimum: A6 (postcards)
Finisher Tray:
• Maximum: 12.6 × 19.2 in. in. (330 x 488 mm)
• Minimum: B5
Supported Paper Weight Top Tray and Finisher Tray: 52 - 253 gsm
Capacity
500 sheets
Note
When using Xerox 20 lb./75 gsm paper.
Tray Capacity Top Tray: 500 sheets
Finisher Tray:3,000 sheets, 200 sets*
Note
When using A4 , B5 , 8.5 × 11 in. , 8 x 10 in. , 7.5 x
10.5 in. , 16K only. When using paper of other sizes, tray
capacity is 1,500 sheets and 100 sets.
Stapling (variable-length) Maximum stapled sheets: 100 sheets
Note
When using paper of size larger than A4 or 8.5 Þ 11 in., the
maximum number of sheets that can be stapled is 65.
Note
Staple nails may bend when using certain paper types.
Paper size :
• Maximum: A3, 11 x 17 in.
• Minimum: B5
Staple position :
• 1 location: (front: angled stapling, center: parallel
stapling, back: parallel stapling)*
• 2 locations: (parallel stapling)
Note: * Angled stapling for A3 and A4
To Next Page
Loading...
Need help?
General