Product overview
Xerox 4112/4127 EPS 1-11
User Guide
Power on/off
After turning the power on, the machine takes approximately 5 minutes to warm up before you
can start making copies.
KeyPoint
It is recommended to turn the machine off at the end of the day or when it is not in use for
a long period of time. Also, to reduce the power consumption, use the Power Saving feature
when the machine is not in use for a while.
Note
For information about Power Saving feature, refer to Power Saver Mode on page 1-12.
Powering on
1. Open the cover.
2. Press the power switch to the On ( l ) position.
Note
The Please wait... message indicates that the machine is warming up. The machine cannot
be used while it is warming up.
Powering off
1. Press the power switch to the Off ( ) position.
2. If the power is to be turned off and then back on, verify that the UI display has turned
completely off, then turn the machine back on.
KeyPoint
Power-off processing is performed internally on the machine and continues after the power
switch is turned off. Therefore, do not unplug the power cord from the power outlet
immediately after turning the power switch off.
WARNING
Never touch a labeled area indicating High Temperature. Coming in contact with these areas can
lead to burns.
CAUTION
Never turn the power off in the following instances:
• While data is being received
• While data is being sent (FTP/SMB/e-mail)
• While jobs are being printed
• While data is being imported from a computer
To Next Page
Loading...
Need help?
General