Paper and other Media
2-2 Xerox 4112/4127 EPS
User Guide
Additional information
• For a description of how to make copies on non-standard size paper, information about
setting Paper Type, Paper Type Priority, Paper Tray Priority, paper quality, and setting the
paper substitute feature refer to. “Paper Tray Settings” in the System Administration Guide.
• The machine automatically detects the size and orientation of loaded paper in trays. The
paper type, however, must be set. For details about changing paper type, refer to "Paper
Tray Attributes" in the System Administration Guide.
Loading Paper into Trays
When a paper tray runs out of paper during printing, a message is displayed on the Control
Panel. Add paper to the tray according to the displayed instructions. Printing is automatically
resumed after paper is added to the tray.
When loading paper into trays:
• Do not load paper exceeding the maximum fill line. Doing so may cause paper jams and
other printer problems.
• Place the paper in the tray with the side to be printed on facing up. Tab paper instructions
may differ.
Loading Paper into Trays 1 and 2
1. Slowly pull out the tray towards you until it stops.
WARNING
If you pull the tray out using too much force, it can hit and injure your knees.
To Next Page
Loading...
Need help?
General