Xerox 8850 System Introduction

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 51
Controller Error Codes Chart
Printed Error Code Description What To Do About Printed Error Code
1xxxxxxxx Error code for internal SCSI target device (hard disk / scanner). Refer to “SCSI Device Error Codes” following this table.
20010100 No response from Floppy Disk Controller to Mode command. Call for Service.
20030100 No response from Floppy Disk Controller to Specify command. Call for Service.
20080100 No response from Floppy Disk Controller to Sense Interrupt command. Call for Service.
20080300 No results available from Floppy Disk Controller for Sense Interrupt
command.
Call for Service.
20130100 No response from Floppy Disk Controller to Configure command. Call for Service.
20FF0100 No response from Floppy Disk Controller to Software Reset. Call for Service.
21030100 No response from Floppy Disk Controller to Specify command. Call for Service.
21040100 No response from Floppy Disk Controller to Sense Drive Status command. Call for Service.
21040300 No results available from Floppy Disk Controller for Sense Drive Status
command.
Call for Service.
21070100 No response from Floppy Disk Controller to Recalibrate command. Call for Service.
21070200 Floppy Disk Controller timed out executing Recalibrate command. Call for Service.
21070400 Floppy Disk Drive recalibration did not complete. Call for Service.
21070500 Floppy Disk Drive recalibration failed. Call for Service.
21080100 No response from Floppy Disk Controller to Sense Interrupt command. Call for Service.

Xerox 8850 Specifications

General

Brand	Xerox
Model	8850
Category	Printer
Language	English