XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 61
Appendix 2 - Key Features of the XES
Synergix 8855 Printer/Digital Solution
XES Synergix 8855 Printer
• High quality, mid to high volume printing.
• Full size media range: outputs from 11” to 36” (279 mm to 914 mm) wide
bond, film or vellum (tracing paper).
• 400 dpi, LED print engine delivering single pixel lines and 256 gray scale
levels.
• Throughput at 6.3 ips and 13 D size prints per minute.
• Hours of unattended operation with four media drawers. Media sizes can
be mixed. Users can mix ISO, ANSI and ARCH media size standards, if
necessary.
• Convenient printer setup from individual workstations using the Web
PMT.
• Available accessories include an optional Folder and Xerox Stacker.
AccXES Controller
• Plug-and-play performance in standalone or networked configurations
with multiple ports: RS-232C Serial port; Bi-directional, IEEE P1284
Parallel port; VPI; Ultra SCSI; and 10/100 T/TX Ethernet port.
• IEEE 1394 interface supports the Synergix Scan System.
• Automatic recognition and rasterization of HP-GL, HP-GL/2, HP-RTL,
CGM (level 1 with ATA ext.), C4, FileNET, Versatec Data Standards
(VRF, ordered vector, blocked raster, compacted raster), VCGL,
CalComp 906/907/957/PCI, TIFF 6.0, NIRS, CALS 1 & 2, JPEG, and
optional PostScript 3 with PDF.
• Printing from UNIX environments using lpr/lpd.
• Print collation from Windows applications that support collation (i.e.,
PowerPoint or Microsoft Word).
• Collated sets of 200 E size pages with 64 MB RAM and a 9.1 GB hard
drive.
• Long plots ranging from 6 to 16 meters (19.7 to 52.5 feet) depending
upon your installation configuration.
• Easy firmware upgrades from individual workstations using the Web
PMT.
• Account Data Tracking is a standard feature, with administration tasks
conveniently performed with the AccXES Account Management Tool
running on a networked client workstation.
• Scan-to-Net is a standard feature with the purchase of an XES Synergix
8855 Digital Solution (printer, Controller, and scanner).
• Effective with Firmware Release 7.5, a new Color Enablement feature
key is available enabling Scanning-to-Net in color in TIFF and JPEG
formats. The printing of JPEG files is also enabled in Firmware Release
7.5.
To Next Page
Loading...
Need help?
General