XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 82
Appendix 5 - X2-TECH Printer/Digital Solution Features and Specifications
Printer Feature Description/Specifications
Controller (KLF)
CPU Power PC 740 200 MHz, 8.5 SpecInt95, 16.0 SpecFP9 (estimated)
Memory 100 MHz, 64 MB SDRAM DIMMs, 192 MB standard
ROM 4-8 MB Flash (upgradeable via host interface)
Hard disk 18 GB Ultra SCSI Hard Disk Standard
Physical Characteristics Standalone tower
Electrical Requirements 120/240 VAC, 50/60 Hz, 10 A
Agency Approvals Safety: UL 1950, CA22.2 No. 950 (CUL), EN 60950 (CE Mark)
EMC: CE Mark; FCC Class A; Canada ICES-003 Class A; VCCI Class A
I/O Ports
Serial (2) 9 pin Host serial port provided. 9 pin service serial port provided. (DTE)
Parallel (IEEE 1284 Compliant) High density port connector provided.
SCSI 50 pin SCSI Connector provided.
VPI 37 pin D Connector provided.
Ethernet 10 BaseT/100 BaseTX network interface card with RJ45 connection.
Scanner 68 pin SCSI Connector provided.
IEEE 1394 Interface supporting the Synergix Scan System.
To Next Page
Loading...
Need help?
General