Xerox Phaser 5335 User Manual

5.2 Setting the Common Menus 85
[IPP]
Set this when using the IPP port.
Note
• [IPP] appears only when the network expansion card (optional) is installed.
[EtherTalk]
Set this when using the EtherTalk port.
Note
• [EtherTalk] appears only when the network expansion card (optional) is installed.
Network / Port
IPP
IPP
Port Status
IPP
Print Mode
Setting Item Description
Port Status Sets whether to enable or disable the IPP port at printer start-up.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Print Mode Sets the method of processing data (print language).
• [Auto] (default)
After receiving data from a computer, the printer automatically detects its
print language and processes the data accordingly. (See *1 on P. 111.)
• [ESC/P], [PS], [PCL]
After receiving data from a computer, the printer processes the data with the
selected print language.
• [HexDump]
Allows you to view data received from a computer by printing it in ASCII
codes (hexadecimal format). (See *3 on P. 111.)
Network / Port
EtherTalk
EtherTalk
Port Status
Setting Item Description
Port Status Sets whether to enable or disable the EtherTalk port at printer start-up.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.

Xerox Phaser 5335 Specifications

General

Brand	Xerox
Model	Phaser 5335
Category	Printer
Language	English