Xerox Phaser 5335 User Manual

4 1 Printer Environment Settings
1.2 Connecting a Cable
Connect the printer to your computer using an interface cable appropriate for your
connection method.
An interface cable is not included with the printer. You must purchase it separately.
Parallel Connection
1. Switch the printer off.
2. Plug the parallel cable into the interface connector on the printer.
Secure the parallel cable into the connector using the clips on both sides of the
connector.
3. Plug the other end of the parallel cable into your computer.
4. Switch the printer on.
USB Connection
When using USB connection, install a print driver on your computer before connecting the
cable. For installation instructions, refer to "1.6 Installing a Print Driver" (P. 16) or the
Documentation CD-ROM.
1. Switch the printer off.
2. Plug the USB cable into the interface connector on the printer.
3. Plug the other end of the USB cable into your computer.
4. Switch the printer on.

Xerox Phaser 5335 Specifications

General

Brand	Xerox
Model	Phaser 5335
Category	Printer
Language	English