2.2 Switching On/Off the Power 25
2.2 Switching On/Off the Power
Switching On the Power
1. Press the power switch to the <|> position.
2. When the power is turned on, the display
reads [Please wait...]. Wait until the
message changes to [Ready to print].
Note
• When the display reads [Please wait...], the printer is
warming up and is not ready to print yet.
• If an error message is displayed, refer to "Error
Messages (in Alphabetical Order)" (P. 129) to remedy
the error.
Switching Off the Power
Important
• Do not switch the power off while the hard disk (optional) is being accessed.
• Do not switch the power off when the display reads [Please wait...].
• Do not switch the power off during printing. Doing so can cause paper jams.
• Switching the power off erases the print data remaining in the printer and the information stored in the
printer's memory.
1. Make sure that the printer is not in
operation by checking the display or
indicator lamps.
2. Press the power switch to the <O> position.
To Next Page
Loading...
Need help?
General